Winchester: Difference between revisions

From Xenon Wiki
Jump to navigation Jump to search
(Created page with "{{Infobox_XDK |image = winchester.png |caption = Xbox 360 E Slim |cpu = 45nm 3.2 GHz PowerPC Tri-Core Xenon |memory = 512MB of GDDR3 RAM clocked at 700 MHz |storage = 250GB-50...")
 
No edit summary
Line 28: Line 28:
There was never a sidecar designed for the Winchester board although the slim sidecar daughterboard is present.  The Winchester Stress Kit is also locked to 512MB of RAM usage.  They may have 1GB of RAM but it isn't usable.  These Stress Kits all report as "Test Kits" although it is unknown if adding a Sidecar will convert it to a full Development Kit.
There was never a sidecar designed for the Winchester board although the slim sidecar daughterboard is present.  The Winchester Stress Kit is also locked to 512MB of RAM usage.  They may have 1GB of RAM but it isn't usable.  These Stress Kits all report as "Test Kits" although it is unknown if adding a Sidecar will convert it to a full Development Kit.


The lowest recovery that can run on these Stress Kits is 21256.
The lowest recovery that can run on these Stress Kits is 21256.<ref>Digmac. "Xbox 360 E Winchester Stress Kit - Definitive Thread, Owners List, Pictures." <i>Assemblergames.com</i>, 21 Feb 2017, https://assemblergames.com/threads/xbox-360-e-winchester-stress-kit-difinitive-thread-owners-list-pictures.65646/</ref>
 
== References ==
<references />
 
== Gallery ==
<gallery mode="packed-hover">
File:Estress.JPG
</gallery>

Revision as of 20:36, 12 January 2019

Winchester
Winchester.png
Xbox 360 E Slim
CPU 45nm 3.2 GHz PowerPC Tri-Core Xenon
Memory 512MB of GDDR3 RAM clocked at 700 MHz
Storage 250GB-500GB SATA 2.5"
Graphics 500 MHz ATI Xenos
Networking 100Mbps Ethernet

The Xbox 360 Winchester motherboard was introduced along with the Xbox 360 E Slim during the Xbox One introduction in 2013. The board derives heavily from the previous Corona configuration with a few small hardware differences and security fixes.

History

Hardware

The Winchester board is nearly identical to the previous Corona models with a few small differences. Most notably, this console is incompatible with RGH/RGH2.

The Winchester board was exclusively used in the Xbox 360 E Slim model. Early Xbox 360 E Slim models used a final revision Corona board slightly modified in order to liquidate their stock.

Case differences aside, the biggest differences with the board include the XCPU missing the IHS, the digital audio out port being removed and a single USB port missing.

Stress Kit

There was never a full Xbox 360 E Slim or Winchester based XDK available for developers. There are a few rare stress boards that were most likely used for evaluating the motherboard before it was released at retail. The Winchester Stress kits look identical to retail Xbox 360 E Slims with stress wires hanging from the side and an internal asset sticker on the side.

There was never a sidecar designed for the Winchester board although the slim sidecar daughterboard is present. The Winchester Stress Kit is also locked to 512MB of RAM usage. They may have 1GB of RAM but it isn't usable. These Stress Kits all report as "Test Kits" although it is unknown if adding a Sidecar will convert it to a full Development Kit.

The lowest recovery that can run on these Stress Kits is 21256.[1]

References

  1. Digmac. "Xbox 360 E Winchester Stress Kit - Definitive Thread, Owners List, Pictures." Assemblergames.com, 21 Feb 2017, https://assemblergames.com/threads/xbox-360-e-winchester-stress-kit-difinitive-thread-owners-list-pictures.65646/

Gallery