Play and Charge Kit: Difference between revisions

From Xenon Wiki
Jump to navigation Jump to search
imported>Stoker25
(Created page with 'The '''Play and Charge Kit''' is sold seperately from the Xbox 360 Wireless Controller. It contains a rechargable battery pack and a USB cable which connects the controller to th…')
 
imported>Stoker25
No edit summary
Line 1: Line 1:
The '''Play and Charge Kit''' is sold seperately from the Xbox 360 Wireless Controller. It contains a rechargable battery pack and a USB cable which connects the controller to the console.
The '''Play and Charge Kit''' is sold separately from the Xbox 360 Wireless Controller. It contains a rechargable battery pack and a USB cable which connects the controller to the console.


= Battery Pack =
= Battery Pack =

Revision as of 17:41, 29 July 2010

The Play and Charge Kit is sold separately from the Xbox 360 Wireless Controller. It contains a rechargable battery pack and a USB cable which connects the controller to the console.

Battery Pack

The battery pack that comes with the Play amd Charge Kit contains 2 standard rechargable AA batteries soldered to a control circuit board with a 6-pin header.

The pinout for the header is (left to right): Temp, P-/GND, SCK, SCA, P, VCC

The SCK, SCA, GND, and VCC pins are connected to an AT24C04M 2-wire serial EEPROM chip. Presumably the controller checks the EEPROM to verify that the battery pack has been charged fewer than a factory-set number of times and stops charging if that number is exceeded.