Case

The Xbox 360 Case is made of Plastic and can easy be removed :

• Remove the Harddisk
• Remove the Face Plate by inserting your Right thumbs into it and forcing it a bit upwards

File:Sideplate1.jpg Missing From Server

You need to remove this panel before lifting the front panel•Then remove both side pannels by inserting a small iron tool into the holes, and popping out the place holders

• Slowly lift up the Front panel, by unlocking the 4 plastic placesholders about 4cm
• Then insert a small tool in each hole of the backplate and onpup the back side

You now can lift up the upper part of the casing

To remove the border case, Remove 6 large screws from the down panel with a torx T10 screw driver

File:Downcasing.jpg Missing From Server

Close-up of DVD-Drive Motherboard

File:Downpannel.jpg Missing From Server

Close-up of the down panel