Case: Difference between revisions

From Xenon Wiki
Jump to navigation Jump to search
imported>Eugén Jung
m (Removed from "Pages with missing images" category.)
imported>Tuxuser
 
Line 22: Line 22:




[[Category:Hardware]]
[[Category:Xbox360_Hardware]]

Latest revision as of 00:24, 7 January 2014

The Xbox 360 Case is made of plastic and was originally made to be hard to open. However it can easy be removed :

  • Remove the HDD
  • Remove the Face Plate by inserting your Right thumbs into it and forcing it a bit upwards
Face removedzz.jpg

You need to remove this panel before lifting the front panel•Then remove both side pannels by inserting a small iron tool into the holes, and popping out the place holders

  • Slowly lift up the Front panel, by unlocking the 4 plastic placesholders about 4cm
  • Then insert a small tool in each hole of the backplate and onpup the back side

You now can lift up the upper part of the casing

To remove the border case, Remove 6 large screws from the down panel with a torx T10 screw driver.

Underside3.jpg

Downside of the metal casing

Therm removed.jpg

Motherboard