Case: Difference between revisions

From Xenon Wiki
Jump to navigation Jump to search
imported>Gamewizard71
mNo edit summary
imported>Tuxuser
No edit summary
Line 4: Line 4:
*Remove the HDD
*Remove the HDD
*Remove the Face Plate by inserting your Right thumbs into it and forcing it a bit upwards
*Remove the Face Plate by inserting your Right thumbs into it and forcing it a bit upwards
  File:Sideplate1.jpg Missing From Server
  [[File:Face_removedzz.jpg]]


You need to remove this panel before lifting the front panel•Then remove both side pannels by inserting a small iron tool into the holes, and popping out the place holders  
You need to remove this panel before lifting the front panel•Then remove both side pannels by inserting a small iron tool into the holes, and popping out the place holders  
Line 11: Line 11:
You now can lift up the upper part of the casing  
You now can lift up the upper part of the casing  


To remove the border case, Remove 6 large screws from the down panel with a torx T10 screw driver  
To remove the border case, Remove 6 large screws from the down panel with a torx T10 screw driver.


  File:Downcasing.jpg Missing From Server
  [[File:Underside3.jpg]]
 
Downside of the metal casing
 
[[File:Therm_removed.jpg]]


Close-up of DVD-Drive
Motherboard
Motherboard


File:Downpannel.jpg Missing From Server
Close-up of the down panel


[[Category:Hardware]]
[[Category:Hardware]]
[[Category:Pages with missing images]]
[[Category:Pages with missing images]]

Revision as of 13:23, 11 February 2011

The Xbox 360 Case is made of plastic and was originally made to be hard to open. However it can easy be removed :

  • Remove the HDD
  • Remove the Face Plate by inserting your Right thumbs into it and forcing it a bit upwards
Face removedzz.jpg

You need to remove this panel before lifting the front panel•Then remove both side pannels by inserting a small iron tool into the holes, and popping out the place holders

  • Slowly lift up the Front panel, by unlocking the 4 plastic placesholders about 4cm
  • Then insert a small tool in each hole of the backplate and onpup the back side

You now can lift up the upper part of the casing

To remove the border case, Remove 6 large screws from the down panel with a torx T10 screw driver.

Underside3.jpg

Downside of the metal casing

Therm removed.jpg

Motherboard