Case: Difference between revisions
Jump to navigation
Jump to search
imported>Stoker25 No edit summary |
imported>Gamewizard71 mNo edit summary |
||
| Line 2: | Line 2: | ||
The Xbox 360 '''Case''' is made of plastic and was originally made to be hard to open. However it can easy be removed : | The Xbox 360 '''Case''' is made of plastic and was originally made to be hard to open. However it can easy be removed : | ||
*Remove the | *Remove the HDD | ||
*Remove the Face Plate by inserting your Right thumbs into it and forcing it a bit upwards | *Remove the Face Plate by inserting your Right thumbs into it and forcing it a bit upwards | ||
File:Sideplate1.jpg Missing From Server | File:Sideplate1.jpg Missing From Server | ||
Revision as of 23:14, 9 August 2010
 |
This page needs to be cleaned up, because its either hard to read or contains very little information. You can help Free60 by editing this page and cleaning it up. |
The Xbox 360 Case is made of plastic and was originally made to be hard to open. However it can easy be removed :
- Remove the HDD
- Remove the Face Plate by inserting your Right thumbs into it and forcing it a bit upwards
File:Sideplate1.jpg Missing From Server
You need to remove this panel before lifting the front panel•Then remove both side pannels by inserting a small iron tool into the holes, and popping out the place holders
- Slowly lift up the Front panel, by unlocking the 4 plastic placesholders about 4cm
- Then insert a small tool in each hole of the backplate and onpup the back side
You now can lift up the upper part of the casing
To remove the border case, Remove 6 large screws from the down panel with a torx T10 screw driver
File:Downcasing.jpg Missing From Server
Close-up of DVD-Drive Motherboard
File:Downpannel.jpg Missing From Server
Close-up of the down panel