Case: Difference between revisions

From Xenon Wiki
Jump to navigation Jump to search
imported>Sbrqt
mNo edit summary
imported>Stoker25
No edit summary
Line 1: Line 1:
[[Category:Hardware]]
The Xbox 360 '''Case''' is made of plastic and was originally made to be hard to open. However it can easy be removed :  
The Xbox 360 Case is made of Plastic and can easy be removed :  


*Remove the Harddisk  
*Remove the Harddisk  
Line 20: Line 19:
  File:Downpannel.jpg Missing From Server
  File:Downpannel.jpg Missing From Server
Close-up of the down panel
Close-up of the down panel
[[Category:Hardware]]
[[Category:Pages with missing images]]
[[Category:Pages that need to be cleaned up]]

Revision as of 20:02, 29 July 2010

The Xbox 360 Case is made of plastic and was originally made to be hard to open. However it can easy be removed :

  • Remove the Harddisk
  • Remove the Face Plate by inserting your Right thumbs into it and forcing it a bit upwards
File:Sideplate1.jpg Missing From Server

You need to remove this panel before lifting the front panel•Then remove both side pannels by inserting a small iron tool into the holes, and popping out the place holders

  • Slowly lift up the Front panel, by unlocking the 4 plastic placesholders about 4cm
  • Then insert a small tool in each hole of the backplate and onpup the back side

You now can lift up the upper part of the casing

To remove the border case, Remove 6 large screws from the down panel with a torx T10 screw driver

File:Downcasing.jpg Missing From Server

Close-up of DVD-Drive Motherboard

File:Downpannel.jpg Missing From Server

Close-up of the down panel